![]() ![]() ![]() Increase or decrease the amount of CMYK used in the job.This dialog will have 3 tabs, “ Color Adjust“, “ Processing Options“, and “ Ink Removal“.Ĭolor Adjust values are set according to the ICC profile that you are currently using.This opens the Easy Color Adjustments dialog. To adjust the settings for all jobs coming into the queue: With the job selected in the queue, look to the lower right, there are three tabs. If there are issues with colors, there are a few places you can make quick adjustments without getting too deep into color management settings. If the test print meets your desired quality level, you can then move ahead with your print jobs. This print out contains photographs and gradients to check color accuracy. Select the job in the queue and click on the “Print” icon.Find the file labeled “Profile test chart” select it and click “OK”.A dialog will open with a list of images. ![]() If the output demonstrates that your inks are in the correct order, you can move to the next step to ensure your profile is producing colors to your specifications. With the CADlink Test Page selected in the queue, click on the print icon above. If the swatch is labelled yellow but you see another color, your ink cartridges are in the wrong order. There are labelled swatches allowing you to quickly see if there is an issue with ink order. This generates a color chart used by CADlink to check ink order. Select “Quick Print Test” found at the bottom.Once you’ve completed the preliminary setup: This feature is designed to work specifically with Epson-based printers and won’t work with other import-controller based machines. If the order is incorrect the result will be an unusable product. It’s important to ensure the order matches the physical ink cartridge so the printer uses the correct ink color when printing the job. This dialog shows the ink cartridges your printer has and the order in which they are installed.This will vary depending on the printer you are using. Confirm you have the correct Printmode selected for the job, as well as the correct paper type, layout, and paper source.Īfter you’ve established these settings are correct, check the ink order of your printer. The common settings for the queue are found in the “Queue” tab found in the bottom right when the active queue is selected. In the third column you can see the port that the printer is using and whether it is a usb connection or an ip address on the network.Īfter closing the Queue Manager, you can check the other settings of the queue that you are using.In the dialog that opens you’ll find the name of the queue that you will be using, along with your installed printer.Your next step before printing your first Direct To Film project is to verify your printer setup, such as ensuring you set the proper printer port, paper selection, page layout and paper source. This way you can rule out hardware issues if you have problems when printing. If your printer has sat inactive for a period of time, it is suggested that you perform a nozzle check with your printer’s utilities. If not, go check out the video How To Install And Set Up Your Printer In Digital Factory DTF Edition. To get started, we are assuming you have your printer installed. Let’s take a look at the process, covering:ĬADlink’s Digital Factory Direct To Film edition allows you to prepare your job, manage color, and automate your production with built-in tools. Using Digital Factory Direct To Film edition, getting a color accurate, low cost, good feeling print is easy. Many graphics professionals are all talking about one process: producing a direct to film job. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |